Track removal in a rectangular chamber
Track removal in a rectangular chamber
Section titled “Track removal in a rectangular chamber”How does a size-dependent wall-loss law change total particle abundance while leaving individual particle masses fixed? This example follows a prescribed binned population for 30 minutes in a rectangular chamber. It connects an instantaneous loss rate to a numerical decay trajectory and an explicit check of the update formula.
Prepare a local calculation
Section titled “Prepare a local calculation”Use Python 3.12 or newer with Particula and its example dependencies installed. The example prints diagnostics; the plotting cell is commented out and may be enabled locally. For the distinction between removal and particle shrinkage, see CPU dilution.
Keep units visible
Section titled “Keep units visible”All geometry below is in metres, time in seconds, temperature in kelvin, and pressure in pascals. NumPy printing suppresses very small values, so displayed negative zeros in the first few rates do not establish exactly zero loss.
Python · section 1
import numpy as npimport particula as par
np.set_printoptions(precision=3, suppress=True)Initialize a distribution whose total has a clear meaning
Section titled “Initialize a distribution whose total has a clear meaning”The preset uses 250 radius nodes from 1 nm–100 µm, lognormal radius scales 100 nm and 1 µm, geometric standard deviations 1.2 and 1.4, and modal number densities 10¹⁰ and 10⁹ m⁻³. Density is 1000 kg m⁻³. These are demonstration inputs, not a chamber measurement. Bin concentrations are in m⁻³ and sum to total number density.
Python · section 2
particle = par.particles.create_lognormal_binned_particle_data( distribution_type="discrete")print("Bins:", particle.radii[0].size)print( "Initial total concentration:", f"{particle.number_density[0]:.3e} 1/m^3",)Bins: 250
Initial total concentration: 1.100e+10 1/m^3
Specify geometry and environmental conditions
Section titled “Specify geometry and environmental conditions”The rectangular dimensions are 1.0 × 1.2 × 0.8 m. The wall eddy parameter is 10⁻³ s⁻¹ at 298.15 K and 101325 Pa. These fixed conditions determine a loss coefficient kᵢ for each radius. The model contains no growth, sources, dilution, or collisions.
Python · section 3
wall_loss = par.dynamics.RectangularWallLossStrategy( wall_eddy_diffusivity=1e-3, chamber_dimensions=(1.0, 1.2, 0.8), distribution_type="discrete",)T = 298.15 # KP = 101325.0 # PaDistinguish coefficient from rate
Section titled “Distinguish coefficient from rate”loss_coefficient returns kᵢ in s⁻¹. rate combines that coefficient with
current bin concentration, giving −kᵢ Cᵢ in m⁻³ s⁻¹. Consequently a sparsely
occupied bin can have a tiny rate even when its fractional loss is large.
Python · section 4
rate = wall_loss.rate(particle=particle, temperature=T, pressure=P)print("Rate shape:", rate.shape)print("First three rates (m^-3 s^-1):", rate.ravel()[:3])Rate shape: (250,)
First three rates (m^-3 s^-1): [-0. -0. -0.]
Advance 30 minutes with a positivity bound
Section titled “Advance 30 minutes with a positivity bound”Output intervals are 5 s. Internal substeps are selected so the largest kᵢ Δt is at most 0.9, avoiding negative concentrations in the explicit Euler update. The saved run uses nine substeps per interval. This is a positivity condition, not an accuracy criterion.
Because radii and conditions remain fixed, the final array can be checked against repeated Euler decay Cᵢ(0)(1−kᵢ Δt)ⁿ. The assertion checks that discrete update and unchanged individual masses; convergence to continuous exponential decay would require a separate timestep study.
Python · section 5
dt = 5.0 # secondssteps = int((30 * 60) / dt)# Native Euler updates reject negative concentrations. Retain the output# interval and full duration, but bound each internal step by max(k) * dt < 1.sub_steps = max( 1, int( np.ceil( np.max( wall_loss.loss_coefficient(particle, temperature=T, pressure=P) ) * dt / 0.9 ) ),)print("Internal substeps per output interval:", sub_steps)initial_counts = particle.concentration.copy()initial_masses = particle.masses.copy()loss_coefficients = wall_loss.loss_coefficient( particle, temperature=T, pressure=P)history = np.zeros(steps + 1)history[0] = particle.number_density[0]
for i in range(1, steps + 1): for _substep in range(sub_steps): particle = wall_loss.step( particle=particle, temperature=T, pressure=P, time_step=dt / sub_steps, ) history[i] = particle.number_density[0]
# Fixed radii give an independent repeated-Euler decay prediction.np.testing.assert_allclose( particle.concentration, initial_counts * (1 - loss_coefficients * dt / sub_steps) ** (steps * sub_steps), rtol=1e-12, atol=1e-30,)np.testing.assert_array_equal(particle.masses, initial_masses)assert np.all(particle.concentration >= 0)
print("Final concentration:", f"{history[-1]:.3e} 1/m^3")print("Relative decay:", f"{history[-1] / history[0]:.3f}")Internal substeps per output interval: 9
Final concentration: 1.065e+10 1/m^3
Relative decay: 0.968
Optional view of the aggregate decay
Section titled “Optional view of the aggregate decay”The commented plot would show total number divided by its initial value. That total sums bins with different loss coefficients, so it need not follow a single exponential. No figure is emitted by this cell in the published run.
Python · section 6
# from matplotlib import pyplot as plt# minutes = np.arange(steps + 1) * dt / 60.0# plt.plot(minutes, history / history[0])# plt.xlabel("Time (min)")# plt.ylabel("Normalized concentration")# plt.title("Rectangular wall loss (1.0 x 1.2 x 0.8 m)")# plt.grid(True)# plt.tight_layout()# plt.show()Keep representation semantics separate
Section titled “Keep representation semantics separate”The PDF example below calculates an instantaneous rate and checks its sign and finiteness. Its concentration measure differs from bin totals. The resolved example constructs state and strategy, but its advance is commented out; this page therefore does not demonstrate a resolved trajectory.
Python · section 7
# Continuous PDF example (same call pattern)wall_loss_pdf = par.dynamics.RectangularWallLossStrategy( wall_eddy_diffusivity=1e-3, chamber_dimensions=(1.0, 1.2, 0.8), distribution_type="continuous_pdf",)particle_pdf = par.particles.create_lognormal_binned_particle_data( distribution_type="continuous_pdf")rate_pdf = wall_loss_pdf.rate(particle_pdf, temperature=T, pressure=P)assert np.all(np.isfinite(rate_pdf)) and np.all(rate_pdf <= 0)
# Particle-resolved examplenp.random.seed(42)resolved = par.particles.create_lognormal_resolved_particle_data()wall_loss_resolved = par.dynamics.RectangularWallLossStrategy( wall_eddy_diffusivity=1e-3, chamber_dimensions=(1.0, 1.2, 0.8), distribution_type="particle_resolved",)# resolved = wall_loss_resolved.step(# particle=resolved, temperature=T, pressure=P, time_step=dt# )What the checked trajectory supports
Section titled “What the checked trajectory supports”The saved binned run decreases from 1.100×10¹⁰ to 1.065×10¹⁰ m⁻³, retaining about 96.8% after 30 minutes. The update preserves individual masses while reducing abundance. It is evidence for the specified numerical calculation, not validation against a chamber experiment.
To estimate a size-dependent chamber lifetime, compare per-bin survival and repeat with finer substeps. Then vary geometry or wall-mixing strength within measurement uncertainty. The spherical example uses different geometry and duration; match those comparison choices explicitly rather than attributing every difference to shape.
Explore this topic: Wall deposition